Wallpaper quantity depends on full-height strips, not just the area printed on a roll. This calculator estimates each wall separately, allowing for trimming and a repeated pattern increment. Its conservative method does not share leftovers between walls, which makes the purchasing assumptions easy to inspect.
How to use this calculator
1. Add the walls you plan to cover
Enter each wall’s width and height. Add or remove rows as needed. Measure around the real room; walls that look similar may have different heights or widths.
2. Read the roll specifications
Enter roll width and roll length in the same displayed units as the walls. For a pattern repeat, enter the repeat distance. Use zero for the simple straight-match calculation without a repeat allowance.
3. Choose trimming allowance
Enter the total extra strip length for top and bottom trimming combined. Review effective strip lengths, strips per roll and whole rolls for each wall. If a roll is too short for one strip, the tool explains the issue.
The formula and assumptions
With repeat: effective strip = ceil[effective strip ÷ repeat] × repeat
Wall strips = ceil[wall width ÷ roll width]
Strips per roll = floor[roll length ÷ effective strip]
Wall rolls = ceil[wall strips ÷ strips per roll]
No window or door area is automatically deducted. Strips may still need to bridge openings, and useful offcuts depend on a real cutting plan. Whole rolls are rounded up for each wall before totals are added. This is deliberately conservative: it may be more than an installer needs when compatible leftovers can be shared. Drop-match designs, alternate strip orientation, borders and complicated openings are outside this model. Check the specific wallpaper hanging instructions and batch information before purchasing.
A worked example
For one wall 4 m wide and 2.5 m high, a 0.53 m × 10 m roll and 0.1 m trimming allowance give an effective strip length of 2.6 m. Eight strips cover the width and three complete strips fit on each roll, so that wall needs three rolls. A second identical wall is estimated separately and adds another three rolls, for six total. A 0.64 m repeat would round the 2.6 m strip length up to 3.2 m.
Common mistakes to avoid
- Dividing total wall area by roll area and assuming all remnants can become full-height strips.
- Entering trimming allowance for just one end while expecting the tool to double it. Enter the combined total.
- Confusing pattern repeat distance with the entire roll length. Read both values separately.
- Automatically removing doors and windows from a full-strip estimate without checking where strips actually fall.
Frequently asked questions
Why are leftover strips not shared?
Independent wall estimates keep the method transparent. A professional cutting plan may use leftovers more efficiently.
What if no full strip fits on a roll?
The calculator stops with a wall-specific message. Check wall height, trim, repeat and roll length rather than using an invalid roll count.
Does it handle drop-match wallpaper?
No. A drop-match can shift adjacent strip starting points. Follow the product’s pattern and hanging instructions.
Can I calculate several walls?
Yes. Add one row per wall. The total is the sum of independently rounded whole-roll quantities.