Plan curtain widths from a measured rod span or a window width plus side extensions. Then enter the drop measured directly from the actual hanging point to the intended hem. The result separates finished sizing from an optional custom-fabric sewing allowance.
How to use this calculator
1. Start with the rod span
If a rod or track is already installed, enter its usable measured width. That value takes priority over the window width and extension fields. Otherwise, the tool adds one extension to each side of the window.
2. Choose fullness and panel count
A factor of 1.5 gives a relaxed total width, 2 is a balanced starting example and 2.5 gives more gathering. These are adjustable planning choices, not universal instructions. Enter the number of panels you will use.
3. Measure the finished drop directly
Measure from the appropriate attachment point for your heading style to the desired hem. Enter a separate total sewing allowance only when planning fabric cuts; a ready-made panel may already include its construction allowances.
The formula and assumptions
Combined curtain width = rod span × fullness
Width per panel = combined width ÷ panel count
Fabric cut length = measured finished drop + sewing allowance
The width per panel is an equal share of the planned combined width. Pinch pleats, eyelets, rod pockets and other headings use fabric differently; check whether a manufacturer quotes flat fabric width or finished gathered width. The tool does not infer curtain drop from window height. It does not calculate lining, joining seams, pattern matching, shrinkage or total fabric yardage. Custom construction may require extra width as well as length allowances beyond this simple plan.
A worked example
A 1.5 m window with a 0.2 m extension on each side gives a 1.9 m rod span. At 2× fullness, combined curtain width is 3.8 m. With two panels, that is 1.9 m per panel. A directly measured drop of 2.2 m and total sewing allowance of 0.2 m give a 2.4 m fabric cut length. If you enter an actual rod width of 2 m, combined width becomes 4 m at the same fullness.
Common mistakes to avoid
- Using window width when a measured track extends farther on either side.
- Adding fullness to a product that is already sold using finished gathered dimensions without checking its sizing guide.
- Using window height as curtain length even though the rod hangs above the window or the hem extends below it.
- Adding sewing allowance twice when buying ready-made curtains rather than cutting fabric.
Frequently asked questions
What if I know the actual rod width?
Enter it in the optional measured rod field. The calculator uses that value instead of estimating a rod span from extensions.
Is 2× fullness required?
No. It is an adjustable example. Fabric weight, heading construction, desired appearance and manufacturer guidance determine the right factor.
Where should I measure the drop from?
Use the attachment point relevant to your heading and hardware. Measure all the way to the intended finished hem.
Does the result tell me how many meters of fabric to buy?
No. Cut length alone does not account for fabric width, panel joining, pattern matching, hems in the width direction or lining.