Estimate wall paint for a rectangular room using dimensions, openings and the coverage on your chosen product. The calculation is for walls only; ceilings are excluded. It separates the measured surface area from the effect of coats and an optional extra allowance so you can see why the final quantity changes.
How to use this calculator
1. Measure the room and walls
Enter room length, width and wall height in one system. The method assumes four straight walls with the same height. Record different surfaces separately if the room does not match that description.
2. Record openings and coverage
Add the areas of doors and windows you will not paint. Enter that total as an area, not a width. Read the paint label for coverage per liter or per US gallon per coat.
3. Choose coats and allowance
Enter a whole number of coats. Set any extra allowance separately; it is applied after the base paint quantity. Review the gross and net wall areas before using the result as a shopping starting point.
The formula and assumptions
Net wall area = gross area − openings
Base paint = net area × coats ÷ coverage
Final estimate = base paint × (1 + extra ÷ 100)
Coverage is a product-specific planning value, not a guarantee. Porous surfaces, rough texture, rollers, spraying, primer needs and major color changes can alter use. Do not treat primer as a coat of the same wall paint unless the manufacturer explicitly supports that approach. The imperial option uses US gallons, not imperial gallons. Switching systems converts lengths, excluded areas and the area-per-paint-volume coverage consistently.
A worked example
For a 4 m × 3 m room with 2.5 m walls, gross wall area is 35 m². Subtracting 2 m² of openings leaves 33 m². At two coats and 10 m² per liter per coat, the estimate is 6.6 liters before allowance. Adding 10% would bring it to 7.26 liters. Paint tins come in specific sizes, so choose a suitable combination after confirming product information.
Common mistakes to avoid
- Entering the area of one wall as the room length, or including the ceiling in a wall-only estimate.
- Using a multi-coat coverage claim as if it were per-coat coverage. Check the product wording.
- Subtracting an opening twice or excluding more opening area than the whole room has.
- Rounding the paint estimate down before choosing tin sizes. Preserve the calculated estimate until the purchasing step.
Frequently asked questions
Does this estimate include the ceiling?
No. Measure the ceiling area separately and use its own product coverage and coat requirements.
Why does the tool reject my openings?
Excluded opening area cannot be larger than gross wall area. Check squared units and the dimensions of each opening.
Can I enter zero extra allowance?
Yes. Zero allowance shows the base estimate without an additional percentage. Real-world product use may still vary.
Does a gallon mean an imperial gallon?
No. The imperial measurement option uses feet, square feet and explicitly labeled US gallons, with 3.785411784 liters per US gallon.