Compare a rectangular furniture footprint with a rectangular area of floor. The tool checks the normal orientation and a 90-degree rotation, with an optional equal clearance on each side. A scaled schematic shows the required footprint against the available space.
How to use this calculator
1. Measure usable floor space
Enter available width and depth after accounting for fixed objects. Do not use the full room rectangle if cabinets, radiators or another piece of furniture occupy part of it.
2. Measure the furniture
Record its maximum footprint width and depth, including fixed projections. Add the same clearance to each side if you want a simple planning buffer. The tool adds twice that amount to both width and depth.
3. Compare both orientations
Calculate and inspect the standard and rotated results. A negative remaining dimension shows the shortfall. The diagram uses standard orientation when it fits; otherwise it shows the rotated option, even if that also does not fit.
The formula and assumptions
Required depth = furniture depth + 2 × clearance
Fits = required width ≤ available width AND required depth ≤ available depth
Repeat with furniture width and depth swapped for a 90° rotation.
This is a floor-footprint check only. It does not verify delivery routes, doors, stair turns, ceiling height, access for carrying, opening drawers, recliners or building requirements. Equal clearance is a user-chosen planning input, not a safety rule. A footprint that fits mathematically may still make a room awkward to use. Check how the furniture operates and leave space appropriate to actual movement and use. The schematic is a top-down illustration and is not a construction drawing or safety certification.
A worked example
In a 3 m × 2 m floor space, a sofa 2 m wide and 0.9 m deep with 0.2 m clearance on every side needs 2.4 m × 1.3 m. It fits in the standard orientation, leaving 0.6 m of width and 0.7 m of depth beyond the entered clearance. Rotated, it needs 1.3 m × 2.4 m, which does not fit the 2 m available depth. The negative remaining depth is −0.4 m.
Common mistakes to avoid
- Measuring only a sofa’s seat rather than its widest arms or fixed legs.
- Assuming a rotated footprint means a large item can be carried through the doorway.
- Including a clear floor rectangle that a door must swing into.
- Entering a total two-sided buffer in the per-side field; the tool doubles that value for each dimension.
Frequently asked questions
Is the diagram drawn to scale?
It scales both rectangles from the entered dimensions, but remains a schematic. It does not show room obstacles or a delivery path.
What does a negative remaining dimension mean?
The required footprint is larger than the available dimension by that amount. That orientation does not fit.
Can it test a recliner while open?
Only if you enter the footprint of the open position. It does not model changing positions or moving parts.
Does “fits” mean the arrangement is safe?
No. The statement only compares entered rectangular floor dimensions. Confirm circulation, product instructions and applicable requirements separately.