Use floor and tile dimensions to estimate an area-based tile quantity. Add a chosen percentage for offcuts or spare material, then convert the result to whole boxes if you know the pack size. This is a quantity estimate, not a drawing of where every tile will go.
How to use this calculator
1. Measure the floor footprint
Enter the length and width of a rectangular floor. For an irregular room, first break the area into measured sections; do not force the longest dimensions into a rectangle that includes floor that does not exist.
2. Enter both tile dimensions
Use the same displayed length unit as the floor. A 500 mm tile is 0.5 m, not 500 m. The measurement converter can help before you begin.
3. Set an allowance and pack size
Choose an allowance suited to the planned layout and material. If tiles come in boxes, enter the whole number of tiles in one box. Review both tile and box quantities before ordering.
The formula and assumptions
Tile area = tile length × tile width
Final tiles = ceil[(floor area ÷ tile area) × (1 + extra ÷ 100)]
Whole boxes = ceil[final tiles ÷ tiles per box]
The model divides floor area by nominal tile area and applies the chosen allowance before rounding up once. The separate pre-allowance output is the whole-tile ceiling of the unadjusted area ratio. Grout joints, actual tile size, direction, pattern repeats, edge cuts and breakage can change the real quantity. A diagonal or complex layout may require a different allowance from a straight layout. Ask the supplier or installer to review a cutting plan for the particular room.
A worked example
A 5 m × 4 m floor covers 20 m². One 0.5 m × 0.5 m tile covers 0.25 m². The unadjusted area ratio is 80 tiles. With 10% extra, the final estimate is 88 tiles. If a box contains eight tiles, you need 11 boxes. If it contains six, you need 15 boxes, supplying 90 tiles rather than exactly 88.
Common mistakes to avoid
- Mixing millimeters and meters in the same calculation. Convert every length first.
- Multiplying tile width by a tile count instead of calculating the area of one tile.
- Applying the allowance after prematurely rounding up the base ratio; this can change the final number.
- Treating the final tile count as a guaranteed installation quantity without checking edge cuts and box contents.
Frequently asked questions
Is grout spacing included?
No. This is an area-based estimate using the entered tile dimensions. Grout spacing and the installation layout need a separate check.
Is 10% always the correct allowance?
No. It is an adjustable example. Room shape, patterns, cuts, handling and spare-stock preferences affect a sensible allowance.
Can I leave tiles per box blank?
Yes. The tool will show tile quantities without a box result. A supplied box size must be a positive whole number.
Why are boxes rounded up?
You generally purchase full boxes. Rounding down can leave you with fewer tiles than the estimated requirement.